impacting videp- Factory Suppliers Manufacturers From China
abide by the contract", conforms towards the market requirement, joins during the market competition by its good quality likewise as provides additional comprehensive and great services for customers to let them turn out to be big winner. The pursue of your enterprise, is the clients' fulfillment for impacting videp,hydraulic breaker box type,Sincerely hope to build long term business relationships with you and we will do our best service for you. The product will supply to all over the world, such as Europe, America, Australia,Jersey, Kyrgyzstan,Serbia, Spain.With nearly 30 years' experience in business, we are confident in superior service, quality and delivery. We warmly welcome customers from all over the world to cooperate with our company for common development
After connecting the pressure gauge to the three-way valve, turn the handle of the three-way valve counterclockwise.
Connect the inflation hose to the nitrogen cylinder.
After removing the screw plug of the crushing hammer, install the three-way valve on the charging valve of the upper body. (ensure O-ring is installed on the three-way valve)
Connect the other end of the inflation hose to the three-way valve.
Turn the valve handle on the nitrogen bottle counterclockwise to discharge nitrogen (N2), and then slowly turn the three-way valve handle clockwise to the specified set inflation pressure.
Turn the three-way valve handle counterclockwise to close the three-way valve, and then turn the valve handle on the nitrogen cylinder clockwise to close the nitrogen.
After the inflation hose is removed from the three-way valve, the cap of the three-way valve shall be fastened.
Turn the three-way valve handle clockwise to check the inflation pressure in the upper body again.
Remove the inflation hose from the three-way valve.
Install the three-way valve firmly on the charging valve.
When the three-way valve handle is turned clockwise, the pressure value in the upper body will be displayed on the pressure gauge.
If the nitrogen pressure is low, repeat steps 1 to 8 until the pressure rises to the specified air pressure value.
If the nitrogen pressure is too high, slowly turn the regulator on the three-way valve counterclockwise, so that the air pressure is discharged from the upper body; When the appropriate and correct pressure value is displayed on the pressure gauge, the regulator shall be closed clockwise. If the pressure is too high, the crushing hammer will not work normally. Ensure that the air pressure meets the specified pressure value and that the three-way valve is equipped with an O-ring.
33rd Edition of the World's Leading Trade Fair for Construction Machinery, Building Material Machines, Mining Machines, Construction Vehicles and Construction Equipment
-October 24–30, 2022 | Trade Fair Center Messe München
The entire industry. In one hot spot.
bauma, the world's leading trade fair for the construction industry, offers you a comprehensive platform for construction machinery, building materials machinery, mining machinery, construction vehicles and construction equipment. Find out about the innovations in the industry here.
Product groups at bauma 2022
Construction and utility vehicles
Construction machinery and attachments
Handling machines and attachments
Special machinery for road construction, maintenance and repair
Lifting equipment, material handling equipment and solutions
Easily installed by a local Komatsu distributor, Smart Construction Retrofit is a low-cost guidance kit that gives operators in the field and managers in the office access to 3D design and payload data to help drive accuracy, control load volumes and improve operations.
Looking for a simple way to improve your grading performance? Now, with Komatsu's easy and affordable Smart Construction Retrofit Kits, conventional Komatsu excavators can be equipped with 3D guidance and payload monitoring, giving operators and managers alike more ways to help work efficiently and accurately, according to the manufacturer.
Designed to improve grading performance and provide more time- and cost-management tools, Smart Construction Retrofit can bring 3D to most Komatsu excavators in your fleet. Easily installed by a local Komatsu distributor, Smart Construction Retrofit is a low-cost guidance kit that gives operators in the field and managers in the office access to 3D design and payload data to help drive accuracy, control load volumes and improve operations.
"No matter where you are in your Smart Construction journey, we have the expertise to help you integrate and optimize your fleet, based on your specific needs," said Komatsu's Ron Schwieters, senior product manager, customer solutions.
"Smart Construction Retrofit kits are an entry-level solution that can help bridge the technology gap and drive production improvements to your fleet."
Benefits of Smart Construction Retrofit
Gives operators the latest design data
Measures payload volume and load counts
Lets you monitor production from the office
Once a conventional excavator is fitted with Smart Construction Retrofit, operators no longer have to set up a laser or bench every time the machine moves. The global navigation satellite system (GNSS) can determine where a machine is on the job site and what the target grade is. The need for additional labor is reduced because the technology collects and delivers information directly to the operator, so fewer people have to be working on the ground, or in an open trench.
Machine production can be monitored from the office by integrating Smart Construction applications, and as-built and payload data can be collected for progress tracking. With Smart Construction Retrofit you can reduce handling and reworking material which helps drive both productivity and profitability. The payload meter helps prevent overloaded trucks by promoting proper loading weights for on- and off-road vehicles, to reduce the potential for equipment damage and other risks.
ATM hydraulic breaker can suif for Komatsu excavator very well . for 0.8t-60t class ,soosan and furukawa series ,welcome inquiry !
Excavator Breaker Attachment, 2,000 ft.-lbs. Adjustable 400-650 bpm; Weight 1,820 lbs. Tool diameter 4.33" Features dust intake prevention systems; Uses: Ideal for concrete demolition, road repair and site preparation with an excavator; Add this breaker attachment to your cart now
Construction Breakers for sale | eBay
Buy Construction Breakers and get the best deals at the lowest prices on eBay! Great Savings
We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!
The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.
This enterprise in the industry is strong and competitive, advancing with the times and develop sustainable, we are very pleased to have a opportunity to cooperate!
We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!